(High Quality)Aluminum Coil Pretreatment/Cleaning machine production line(CE & ISO9001Certification)

1.Production speed:0-30m/min 2.Use no-chrome material 3.Clean different oil exactly 4.Operate easily,evironment,save energy

 CJMHC1600 Aluminum coil cleaning production line

1)Aluminum Pretreatment Production Line plays a role in cleaning the surfaces of the

aluminum coil. After rolling, there are some impure dregs such as silicon, magnesium,

iron and cuprum still stained on the surfaces of the aluminum coil. 

2) This line carries on the chemical treatment on the surfaces to form capillaries by 

latest non-chromium medicament, so that the paint can be bonded tightly with the 

aluminum plates because of the perfect adsorb ability.

3) This line works in accordance with the regulations of national environment protectio

n with no pollution occurred. 

a)Type: Constant Chemical Cleaning Equipment 

b)Production speed:      Name of the production line: Pre-treatment line

                                              Maximum design production speed 0-30 m/min

                                              Actual production speed 0-20 m/min  

c)Key material:

Material	Aluminum roll (CJMHC1300 Chemical)	Aluminum roll (CJMHC1600 Chemical)	Aluminum roll (CJMHC1800 Chemical)	Aluminum roll (CJMHC2000 Chemical)
Width	Maximum 1100mm	Maximum 1400mm	Maximum 1600mm	Maximum 1800mm
Thickness	0.1-0.5mm
Weight	Maximum 3.5ton
Diameter	Maximum 1500mm
Diameter of the core	150-405 mm

  Supporting Material:

Names of Chemical disposal	CLET560L degrease	ACCT7482 Non-chrome Chemical
Notch thickness	3-4%	30-50%
Unit dosage kg/m2	0.008	0.0014

d)Weight of the aluminum reaction film: 40-120mg/m2

f)Heating method of the grease slot fluid:

The temperature of the solution	The highest temperature of the solution 60ºC
Type and temperature of the heater	Heated by electricity, the highest temperature is 60ºC

g)Basic facilities:

   g.1) Apparatus

         Main power:   AC 380 V × 3 PHASE × 50Hz

         Operation power:   AC 220 V × 1 PHASE × 50Hz ---A.V.R

         Voltage windage:     ±10%

         Frequency scope:     ±10%

         Capacity of total installation:   200KW

   g.2) Pressure of the condensed air: 4-6 Kg/Cm2      

   g.3) Water pressure: 3-5 Kg/Cm2  

          Total water quantity: 2 ton/h

h)Dimension: 23000L*4500W*2000H

i)Total weight: 30 ton

Flow drawing:

1.Unreeling Machine

The aluminum roll is imposed with certain tension under the function of the magnetic powder arrester. Then drawn by the driving machine, the aluminum roll is unreeled and transported for exercise.

 2. Splicer

Use the splicer platform to connect the heads of relative aluminum reels by leveling it up.  3.1 Degrease slotUse the alkalescence degrease produced by General Motors of the United States to remove the oil dots and the loose oxide on the surface of the aluminum roll, having no pollution to the environment.3.2 Brush slotClear away the stubborn oil dots and impurity remained on the surface of the aluminum roll.3.3 Wash TankWash clean the aluminum roll degreased and clean most of the water on its surface.6. Reaction machineWhen the aluminum roll is moving forward along the product line after being washed, use the well mixed non-chrome chemical disposal to equally spread and form a film on the face and back of the aluminum roll to make up the surface full of tiny hole like a bee nest. The clinging intensity of the film after this coating should be guaranteed. There should be no pollution to the environment.7. Drying ovenDry the drug fluid on the surface of the aluminum up. 

8. Cooling stove

Blow the heated aluminum roll cold.

9. Driving Machine

Draw the aluminum at a uniform speed. The D.C. motor is to control the driving so as to ensure that running is stable with an equal speed and to ensure the rewinding tension.

10. Rewinder

Tidy up the chemical aluminum roll. The auto controll D.C. motor can always keep the rewinding tension unchanged. 

11. General View

  

           We are the professional manufacturer in china, our company established in 2004. We have exported over 100 production lines to many countries, and obtained good reputation from those factories. Our mission is to research more new technologies to make our customer satisfied. 

Main Production:1.Aluminium Composite Panel Production Line,Fast Speed Aluminium Composite Panel Production Line Hot sales 2.Coil pretreatment line Hot sales

3.Coil coating line(single coating single baking);Coil coating line(double coating double baking) Hot sales 4.Coil pretreatment and double coating double baking line, Coil pretreatment and single coating single baking line Hot sales 5.Embossing machine6.PET film heating laminating line7.Kraft paper heating laminating line 8.Aluminium Composite Panel(A2 fireproof,B fireproof &Original )  Hot sales  

Example of Production Line:

Some Customers Cooperate with us: 

Patent Certificates:

1.Patent Certificate of Energy Saving and Environmental Protection 2.Patent Certificate of Composite Panel Production Line 3.Patent Certificate of Partition Hot-air Oven  4.Patent Certificate of Oven 5.Patent Certificate of Mill 6.Patent Certificate of Invention Patent Type of A2 Fireproof Panel7.CE Certification8.Trademark Certificate9.Quality System Certification

  For more details,please feel free to contact us!24 hous at your service.   

(High Quality)Aluminum Coil Pretreatment/Cleaning machine production line(CE & ISO9001Certification)